Let's face it. Knitting is boring.
No, no, not starting a project, that is great fun. Planning what it will look like, casting on, getting the pattern of stitches established. Love it!
But once it is on the needles and established, it is boring. Same stitch patterns over and over and over and... you get the point. So, why do we do it? We do we knit?
I can't speak for all of us ( some of you out there may be crazy - I know I am suspect...) as for me, I knit because my Grandmother knit.
When I was a girl I would watch her knit (she knitted all the time, I mean ALL of the time - well when ever she was not cooking - boy, could she cook) she would knit cables & lace & "from the back loop", her fingers would just fly. And then when she had finished what she was knitting, she would rip it all out, wind up the ball of yarn and start knitting again. This time a different pattern with different cables and lace and yarn overs and... OK, obviously she was not knitting to make items for the family and herself. She was knitting for another reason. Something else kept those needles in her hands.
There is something about knitting, the rhythm of the needles, the feel of the yarn as it slides through your fingers. It is all intoxicating. But the real reason I knit - I knit because of my grandmother. When I am knitting, I am conjuring up that old woman and she sits beside me, just as she did when I was a small girl. I can feel her watching my stitches as she did back then. "a little tight, try to loosen up the stitches a bit, that's it. They look just right now."
Back then, all I could knit was "purl" and "knit". Now, I can knit almost any kind of stitch and every now and then I will watch my hands make a maneuver that will be just like my grandmother's. Slip-stitch knit, slip-stitch knit. It takes my breath away.
So why do we knit? Maybe it is the rhythm, maybe it is the feel of the yarn. I don't know why my grandmother knit. As for me, I knit because she knit.
Sunday, November 07, 2010
Thursday, June 24, 2010
Sock Measurement Chart
Shoe Size
|
Top of Cuff
|
Heel Flap
|
Foot Length
| |
Kids
|
3 - 5
|
5 ½”
|
1”
|
5”
|
6 ½ - 7
|
6”
|
1”
|
6”
| |
8 - 8 ½
|
6”
|
1 1/3”
|
6 ¼”
| |
9 - 10
|
6 ½”
|
1 ½”
|
7”
| |
10 ½ - 11 ½
|
6 2/3”
|
1 ½”
|
7 ½”
| |
12 - 12 ½
|
7”
|
1 ¾”
|
8”
| |
13
|
7 ¼”
|
1 ¾”
|
8 2/3”
| |
Ladies
|
1
|
7 ¼”
|
1 ¾”
|
8 2/3”
|
2 - 3
|
7 ½”
|
2”
|
9”
| |
4 - 5
|
7 ¾”
|
2”
|
9 ½”
| |
6 - 7
|
8”
|
2 ¼”
|
10 ¼”
| |
8 - 9
|
8 ¼”
|
2 ¼”
|
10 ½”
| |
10 - 11
|
8 ½”
|
2 ¼”
|
11”
| |
Men
|
8 - 9
|
8 ½”
|
2 ¼”
|
11”
|
10 - 11
|
9”
|
2 ½”
|
11 ½”
|
Tuesday, September 13, 2005
Winter Hat
Ok, here is a pattern of my own.
Supplies:
- 300 yards Worsted Weight yarn
- size 11 double pointed needles
- size 11 circular needle
- marker
- darning needle
Using circular needles, loosely cast on 60 (66, 72) stitches of double strands. Join the knitting and work K2, P1 rib for 10 rows.
Knit 30 (40, 50) rows.Begin Decrease Rounds:
Row 1: *K9, K2tog, repeat from * around.Row 2 and all even rows: Knit around.
Note: As you are decreasing, you will have to switch from the circular needle to the double pointed needles. Do so when the knitting gets too tight. Row 3: *K6, K2tog, repeat from * around.
Row 5: *K5, K2tog, repeat from * around.
Row 7: *K4, K2tog, repeat from * around.
Row 9: *K3, K2tog, repeat from * around.
Row 11: *K2, K2tog, repeat from * around.
Row 13: *K1, K2tog, repeat from * around.
Row 15: *K2tog, repeat from * around.
Row 16: Knit around.
Cut yarn, leaving a long tail. Run thread thru remaining stitches and pull tight, knot, and weave in on the inside.
Wednesday, September 07, 2005
Understanding Knitting Instructions
What is stockinette stitch?
When you knit one row and purl the next and continue alternating between knit and purl rows, one side of the fabric is smooth and the other side "bumpy". The smooth side is stockinette. It is sometimes called stocking stitch. It means the same thing.
What is reverse stockinette stitch?
The bumpy side of stockinette.
What is garter stitch?
When you knit every row, then you have made what is called garter stitch. It takes more rows to produce an inch of fabric in garter stitch than stockinette. Garter stitch lies flat.
My project knit in stockinette rolls in. Did I do something wrong?
You did nothing wrong. This is simply the nature of the fabric produced by stockinette. If you are knitting something that will be seamed, such as a sweater, it will be fine once you have sewn the pieces together. If you are knitting a piece that will not be seamed, such as an afghan or a scarf, then you don't want it to roll but rather it should lie flat. Try putting an easy seed stitch border around it and it will lie flat.
What is meant by right side?
This does not mean right vs. left. It means the right side of the fabric; that is, the side that will show on the outside.
How do I work both sides at once?
This is generally done when you are shaping the neck on the front of a sweater. To work both sides at once, you will need to attach a second ball of yarn. Work across the required number of stitches with the ball you've been knitting with. Now the instructions will probably tell you to either bind off some stitches or place them on a holder. If you are going to bind them off, attach a second ball of yarn and then do so. Now work across the remaining stitches with the second ball of yarn. You will now have two balls attached. Work one side with one ball according to the directions, then work the other side. Using this method, you are assured of working the exact number of rows on both sides.
As an alternative, after binding off or placing the neck stitches on a holder, you can place the remaining stitches on a holder. After you have completed one side, place these stitches back on the needles and work them until they match the first side.
Do I have to work a gauge swatch? Why can't I just use the needles the pattern tells me to?
Sorry, but the answer is yes you have to work a gauge swatch...that is, if you want your project to be the correct size. Too few stitches per inch and it will be too big. Too many stitches per inch and it will be too small. The needle size indicated in the pattern is only a suggestion for a place to start. The designer obtained the gauge of the pattern with that needle size. It doesn't mean you will knit to the same gauge. You should always, always, always use whatever size needles you need to in order to obtain the gauge of the pattern.
Even half a stitch per inch will make a huge difference in the outcome so please don't ignore this part of the process. Not convinced you have to swatch first? Let's look at an example. Say you're knitting a sweater with a chest measurement of 40". The back and front will each be 20". The pattern calls for a gauge of 4 stitches to the inch which means you will be working over 80 stitches on the front and 80 on the back (20 x 4 = 80 or 80 / 4 = 20). Suppose you knit to 4.5 stitches to the inch instead. The back and front of your sweater will now only be 17.78" each (80 / 4.5 = 17.78) and not 20". Instead of your sweater measuring 40" when complete, it will only measure 35.56". Clearly, it will be much smaller than you intended. Wasted yarn, wasted time and an unhappy knitter. So swatch and measure!
Do I have to use the same dye lot?
There is a difference in dye lots and it will show. Sometimes it's subtle and sometimes it's very noticeable.
If you run out of yarn and cannot find the same dye lot, the best thing to do is to take what you have to the store and try to get the best match. Look at it in natural and artificial light if possible. Then work alternating rows with the two different dye lots to lessen the effect of knitting with a second dye lot. It's not perfect and you will still see the difference in most cases.
Which rows do I increase on if my pattern says to increase every "x" row?
The actual row numbers may vary depending on the pattern. These are simply examples to help you see the logic:
To increase every other row, increase on rows 1 and 3.
To increase every third row, increase on rows 1 and 4.
To increase every fourth row, increase on rows 1 and 5.
How do I add a new ball of yarn when I run out?
For a new knitter, it is best to add the new ball at the beginning of a row. Simply start knitting with the new ball. Weave in the ends into the seam when finishing your project.
How do I knit with two strands of yarn at the same time?
Working with two balls of yarn, hold one strand of yarn from each ball together. Just pretend it was a single strand. Knit with them both as if it was a single strand. There is no need to twist them together or do anything special. Be sure you use both strands at all times.
Can I convert a crochet pattern to a knitting pattern?
No you can't. Crocheting uses different stitches than knitting; they look different and they are not the same size or shape. Essentially, the project must be redesigned as a knitting pattern and this is not recommended for new knitters.
How do I make the pattern larger or smaller? Can't I just use larger or smaller needles?
Using larger or smaller needles will give you no control over the final size (see the information about working a gauge swatch above). It might fit, it might not. You're really just guessing using this method. To avoid disappointment, please don't do this.
It is possible to make the pattern larger or smaller; however, you will need to know quite a bit about how patterns work and garments are constructed in order to redesign the pattern at a larger or smaller size. As you learn, feel free to explore this area but as a new knitter, it's best to stick to a pattern as written.
What does it mean when a pattern says end with WS or RS?
Sometimes a pattern will be specific and say "End with WS completed, RS ready to begin". Other times, it will simply say "End with WS". This means work the wrong side row and stop there. You will begin the next part of the pattern working on the right side; that is, the right side will be facing you as you work.
What does work even mean?
Work even means to work in the pattern stitch without increasing or decreasing. Usually, the pattern will say something like "Work even for 10 inches".
When you knit one row and purl the next and continue alternating between knit and purl rows, one side of the fabric is smooth and the other side "bumpy". The smooth side is stockinette. It is sometimes called stocking stitch. It means the same thing.
What is reverse stockinette stitch?
The bumpy side of stockinette.
What is garter stitch?
When you knit every row, then you have made what is called garter stitch. It takes more rows to produce an inch of fabric in garter stitch than stockinette. Garter stitch lies flat.
My project knit in stockinette rolls in. Did I do something wrong?
You did nothing wrong. This is simply the nature of the fabric produced by stockinette. If you are knitting something that will be seamed, such as a sweater, it will be fine once you have sewn the pieces together. If you are knitting a piece that will not be seamed, such as an afghan or a scarf, then you don't want it to roll but rather it should lie flat. Try putting an easy seed stitch border around it and it will lie flat.
What is meant by right side?
This does not mean right vs. left. It means the right side of the fabric; that is, the side that will show on the outside.
How do I work both sides at once?
This is generally done when you are shaping the neck on the front of a sweater. To work both sides at once, you will need to attach a second ball of yarn. Work across the required number of stitches with the ball you've been knitting with. Now the instructions will probably tell you to either bind off some stitches or place them on a holder. If you are going to bind them off, attach a second ball of yarn and then do so. Now work across the remaining stitches with the second ball of yarn. You will now have two balls attached. Work one side with one ball according to the directions, then work the other side. Using this method, you are assured of working the exact number of rows on both sides.
As an alternative, after binding off or placing the neck stitches on a holder, you can place the remaining stitches on a holder. After you have completed one side, place these stitches back on the needles and work them until they match the first side.
Do I have to work a gauge swatch? Why can't I just use the needles the pattern tells me to?
Sorry, but the answer is yes you have to work a gauge swatch...that is, if you want your project to be the correct size. Too few stitches per inch and it will be too big. Too many stitches per inch and it will be too small. The needle size indicated in the pattern is only a suggestion for a place to start. The designer obtained the gauge of the pattern with that needle size. It doesn't mean you will knit to the same gauge. You should always, always, always use whatever size needles you need to in order to obtain the gauge of the pattern.
Even half a stitch per inch will make a huge difference in the outcome so please don't ignore this part of the process. Not convinced you have to swatch first? Let's look at an example. Say you're knitting a sweater with a chest measurement of 40". The back and front will each be 20". The pattern calls for a gauge of 4 stitches to the inch which means you will be working over 80 stitches on the front and 80 on the back (20 x 4 = 80 or 80 / 4 = 20). Suppose you knit to 4.5 stitches to the inch instead. The back and front of your sweater will now only be 17.78" each (80 / 4.5 = 17.78) and not 20". Instead of your sweater measuring 40" when complete, it will only measure 35.56". Clearly, it will be much smaller than you intended. Wasted yarn, wasted time and an unhappy knitter. So swatch and measure!
Do I have to use the same dye lot?
There is a difference in dye lots and it will show. Sometimes it's subtle and sometimes it's very noticeable.
If you run out of yarn and cannot find the same dye lot, the best thing to do is to take what you have to the store and try to get the best match. Look at it in natural and artificial light if possible. Then work alternating rows with the two different dye lots to lessen the effect of knitting with a second dye lot. It's not perfect and you will still see the difference in most cases.
Which rows do I increase on if my pattern says to increase every "x" row?
The actual row numbers may vary depending on the pattern. These are simply examples to help you see the logic:
To increase every other row, increase on rows 1 and 3.
To increase every third row, increase on rows 1 and 4.
To increase every fourth row, increase on rows 1 and 5.
How do I add a new ball of yarn when I run out?
For a new knitter, it is best to add the new ball at the beginning of a row. Simply start knitting with the new ball. Weave in the ends into the seam when finishing your project.
How do I knit with two strands of yarn at the same time?
Working with two balls of yarn, hold one strand of yarn from each ball together. Just pretend it was a single strand. Knit with them both as if it was a single strand. There is no need to twist them together or do anything special. Be sure you use both strands at all times.
Can I convert a crochet pattern to a knitting pattern?
No you can't. Crocheting uses different stitches than knitting; they look different and they are not the same size or shape. Essentially, the project must be redesigned as a knitting pattern and this is not recommended for new knitters.
How do I make the pattern larger or smaller? Can't I just use larger or smaller needles?
Using larger or smaller needles will give you no control over the final size (see the information about working a gauge swatch above). It might fit, it might not. You're really just guessing using this method. To avoid disappointment, please don't do this.
It is possible to make the pattern larger or smaller; however, you will need to know quite a bit about how patterns work and garments are constructed in order to redesign the pattern at a larger or smaller size. As you learn, feel free to explore this area but as a new knitter, it's best to stick to a pattern as written.
What does it mean when a pattern says end with WS or RS?
Sometimes a pattern will be specific and say "End with WS completed, RS ready to begin". Other times, it will simply say "End with WS". This means work the wrong side row and stop there. You will begin the next part of the pattern working on the right side; that is, the right side will be facing you as you work.
What does work even mean?
Work even means to work in the pattern stitch without increasing or decreasing. Usually, the pattern will say something like "Work even for 10 inches".
Tuesday, September 06, 2005
My first project was a felted bag
This was my first project. It is the Oregon Tote. The pattern is by Janet Scanlon of www.knitkit.com
Check out her site, she writes wonderful patterns that are very easy to follow.
What a fun bag to knit! Then I felted it in my washing machine.
Fun, fun, fun.
Monday, August 29, 2005
Stitch Glossary
STITCH GLOSSARY
beg - beginningCC - contrasting color
ch - chain
dc - double crochet
dec - decrease
inc - increase
k - knit
K1fb - this is an increase - Knit one in the front, but don't remove the stitch from the left needle, then go through the back loop. You have increased 2 sts from the original single st.
KSP-K1, then sl st back to LH needle, lift 2nd st on LH needle back over returned st and replace returned st on RH needle (1 st dec'd).
K2SP-K2 tog, then sl st back to LH needle, lift 2nd st on LH needle back over returned st and replace returned st on RH needle (2 sts dec'd).
LH - left hand
lp(s) - loop(s)
MC - main color
M1k-Pickup horizontal strand between st just worked and next st, place on LH needle, k this st (inc 1).
M1p-Pickup horizontal strand between st just worked and next st, place on LH needle, p this st (inc 1).
p - purl
psso - pass sl st over k st
pat(s) - pattern(s)
rep - repeat
RH - right hand
RS - right side
rnd(s) - round(s)
sc - single crochet
SKP - sl 1, k 1, psso
sl - slip
SSK - Sl 2 sts knitwise, insert point of LH needle through FRONTS of these 2 sts and k 2 tog.
st(s) - stitch(es)
TBL - through back lp(s)
tog - together
WS - wrong side
wyib - with yarn in BACK
wyif - with yarn in FRONT
yo - yarn over
end on WS - end having just completed a WS row.
end on RS - end having just completed a RS row.
Sunday, August 28, 2005
For starters
I am a new knitter. I started knitting about one month ago, and now I am completely hooked. I have completed 9 projects, including three felted projects. I have three projects on needles now. Oh dear, what have I gotten myself into?
Subscribe to:
Posts (Atom)